IviRFSigGen Configure CDMA External Trigger Slope [CDMA]

IviRFSigGenCDMABase Capability Group

This VI configures the trigger event to occur on the rising or falling edge of the input signal. This setting is used only if IviRFSigGen>>CDMA>>Trigger>>CDMA Trigger Source is set to External.

	instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	slope Specifies whether the trigger event occurs on the rising or falling edge of the input signal. The driver uses this value to set the IviRFSigGen>>CDMA>>Trigger>>CDMA External Trigger Slope property. Defined Values: IVIRFSIGGEN_VAL_CDMA_EXTERNAL_TRIGGER_SLOPE_POSITIVE - Enables rising edge triggering. IVIRFSIGGEN_VAL_CDMA_EXTERNAL_TRIGGER_SLOPE_NEGATIVE - Enables falling edge triggering. Default Value: IVIRFSIGGEN_VAL_CDMA_EXTERNAL_TRIGGER_SLOPE_POSITIVE
	error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
	instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.